Fire-Cryer® Plus Voice Sounders

Fire-Cryer® Plus products comprise the broadest range of voice sounders available. From the Mini Fire-Cryer® Plus designed for discreet mounting under fire detector heads to the powerful Maxi, all Fire-Cryers® can broadcast 7 user-selectable messages chosen from a library of hundreds. Foreign language and bespoke messages are also available.

The Fire-Cryer® Plus offers simple, fully synchronised and cost-effective voice evacuation. Whether retro-fitted into an existing installation or as part of a new system design, the six unique Fire-Cryer® Plus models can be fully integrated into the fire alarm system and work on a conventional two-wire bell circuit.

The six Fire-Cryer® Plus voice sounder models in the range meet every requirement from residential and light commercial to heavy industrial applications. Find out more about the Fire-Cryer® Plus through a series of video clips.

Fire-Cryer® Plus

This voice/strobe combination allows the user to define which of the seven messages are accompanied by the flashing strobe.

• Sound output - 100dB(A)
  
• Optional integral strobe - red lens with red LED or clear lens with dual white and amber LEDs
  
• Low current - average 20mA
  
• No special wiring, easily retro-fitted
  
• Fully synchronised over multi-zones
  
• Deep base version available to IP66

Mini Fire-Cryer® Plus

Slimline base sounder for discreet mounting under fire detectors. Cover plate available for wall mounting.

Sound output - 90dB(A)


Ultra-Slim base sounder to fit industry-standard detectors


Omni-directional sound output


Choice of colour to match detectors


Installer-friendly connections


Suitable for ceiling or wall mounting


Optional front plate for stand-alone use

Midi & Maxi Fire-Cryer® Plus

High-powered voice sounders designed for less hospitable environments such as industrial applications, large open spaces like warehouses and factories, and areas of public gathering or transit.

Fully compatible with Fire-Cryer® Plus and Mini Fire-Cryer® Plus


High output - up to 116dBA


Rugged, weatherproof enclosures

Ani-Mate®

True (sub 400Hz) animal-friendly sounder which leaves dogs, horses and smaller mammals undisturbed. The animate is suitable for use in areas that house mammals that might be sensitive to standard electronic sounders.

The Ani-Mate® is fully compatible with the Fire-Cryer® Plus range or can be used as a tone-only sounder.

Sub 400Hz frequency designed to minimise stress to animals


24Vdc operation means easy interface to existing systems


Low power consumption


Attractive, low profile design


Wide volume control - 83 to 95dBA

Fire-Cryer® Plus Strobe Units

Fire-Cryer® Plus strobe units address the increasing need for visual alarms to accompany voice messages in areas of high ambient noise levels or for installation in buildings in use by the deaf or hard of hearing.

Fire-Cryer® Plus strobe units allow an amber strobe to flash during an alert message which is replaced by a red strobe the moment the evacuation message is broadcast. During 'all clear', 'test', or any one of the hundreds of other message combinations, the strobes remain off and only the voice message is broadcast. The units are also suitable for use on gas suppression systems, where a combination of red strobe and Fire-Cryer® voice sounder is fitted to the module. The red strobe will flash during the first, second and third stage alerts but will cease when the 'all clear message' is broadcast.

Voice Message Controller (VMC)

In order to control the 7 messages on a Fire-Cryer® Plus system, the Fire-Cryer® Plus Voice Message Controller can be used. The VMC is a fully wired switching interface with clear operation instructions printed on the facia.

Ideal for retrofit installations


Eases integration of the Fire-Cryer® Plus at new sites


Can be linked for synchronisation over numerous zones


Ease of use benefits the customer

Have you found your voice?