Despite significant resources spent on reducing loss through fire, there is a much greater threat to business continuity, disruption and asset damage through water leaks.
Statistics show that the most likely cause of claims in blocks of flats, hotels, retail premises and commercial buildings is water damage. UK insurers confirm that water leakage is now the costliest and most common claim made by commercial customers with a total loss in the UK alone approaching £800 million.
The financial sector is particularly vulnerable to such potential losses with Data Centre outages costing an average of £12,000 per minute, hourly losses on the Stock Exchange around £4.5 million and Credit Card Clearance around £1.8 million. Water leakage damage costs alone can be significant and it is not just the obvious cost of physical damage to IT equipment and the fabric of the building. Like fire damage, even a seemingly minor water leak can result significant business interruption including temporary relocation, increased employment costs and loss of profits.
The only way to mitigate the risk of water damage is to continuously monitor for water leaks Leading the way in Water Detection technology is the Vimpex Hydrosense system, the most sophisticated configurable water leak detection system on the market. Hydrosense systems deliver a new standard in Water Leak Detection and are designed to protect areas where water ingress could seriously damage electrical, communication and computer networks. It continuously monitors for water leaks around the clock, year in year out and has the facility for 72 hour battery standby in the event of power failure. Should a leak be detected the control panel sounds an alarm which can be extended to a remote location. When an alarm is raised, Vimpex Hydro-Cryer voice sounders can be used to broadcast an unambiguous message, avoiding confusion with other sounders on site.
Hydrosense systems provide both linear detection using Hydrowire and point detection using probes. Linear detection Hydrowire is a flexible cable which will continuously monitor large areas. When even a small amount of water or moisture comes into contact with Hydrowire it will trigger an alarm. Point detection is provided by Hydrosense floor or drip tray probes, these are fixed to the floor or drip tray and adjusted to give the required detection level and connected to the control panel via a Hydrosense water leak detection module.
Utilising life safety technology in the design of Hydrosense provides the reliability and integrity of BSi approved fire detection systems, meaning there is virtually no risk of failure, downtime and significantly fewer false alarms.
To book an appointment to discuss Hydrosense at Data Centre World, please email [email protected] or call 01702 216999